Bucket Elevator

Home > Products > Bucket Elevator

Bucket Elevator Series

The bucket elevator is suitable for vertically conveying powdery, granular and small-lump non-abrasive or low-abrasive bulk materials, and is widely used in the grain, coal, building materials, metallurgy, chemical and power industries. We provide the full series of bucket elevators: belt type (D/TD), plate-chain type (NE), ring-chain type (TH) and the TDG/THG types.

  • D/TD belt type: lifting height up to 40 m, throughput 4~240 m³/h
  • NE plate-chain type: throughput 15~800 m³/h, material temperature up to 250℃
  • TH ring-chain type: maximum throughput 365 m³/h, maximum lifting height 50 m
  • TDG/THG types: fully sealed casing, flexible transmission, automatic tensioning
Applications: cement clinker · finished cement · coal · slag · grain · sand · coke fines · crushed ore · silicates and other powdery or granular materials lifted vertically

Product Series and Main Parameters

Five main types · selected according to material characteristics, lifting height and throughput

D Type / TD Type Belt Bucket Elevator

Designed and manufactured per the national standard, with high-strength conveying belt, and available in two discharge modes: centrifugal and mixed. It is suitable for vertically conveying powdery, granular and small-lump non-abrasive bulk materials.

ParameterValue
Lifting heightUp to 40 m (material r ≤ 1.5)
Throughput4 ~ 240 m³/h
Discharge modeCentrifugal / mixed
Material temperatureGenerally not above 80℃; not above 150℃ when heat-resistant conveying belts are selected

NE Type Plate-Chain Bucket Elevator

Widely used for vertical lifting of all kinds of powdery and bulk materials: inflow feeding, gravity-induced discharge and dense, large-capacity bucket conveying, with low chain speed, large lifting capacity and almost no back-flow of material, so the power consumption is low.

ParameterValue
Throughput15 ~ 800 m³/h
Material temperatureUp to 250℃ (suitable for strongly abrasive materials)
Lifting heightHmax = 40 m
Conveying chain lifeHigh-strength, wear-resistant plate chain, service life generally over 5 years
Structural featuresCompact structure, good sealing and rigidity, smooth and reliable running, few wear parts

TH Type Ring-Chain Bucket Elevator

The traction chain is manufactured per ISO610-79, with a large breaking load, good wear resistance and long life; the tail uses gravity tensioning, so running is smooth and reliable; the sprockets are collapsible, which makes repair and replacement easier.

ParameterValue
Maximum throughput365 m³/h
Maximum lifting height50 m
Bulk density of materialPowdery, granular and small-lump low-abrasive materials with bulk density ≤ 1.5 t/m³
Material temperatureNot above 250℃
Bucket typeZH type (medium deep bucket) / SH type (deep bucket)
Gear reducerZJ type shaft-mounted gear reducer (mounted directly on the main shaft head, saving the transmission platform and coupling, compact and light, with an internal shaped roller back-stop, reliable back-stop and smooth running) / ZSY type hardened surface gear reducer

TDG Type / THG Type Bucket Elevator

Large throughput, high lifting height, smooth and reliable running and long service life. The head, tail and intermediate casings are all sealed, so neither material nor dust escapes; the transmission device uses a vertical-shaft gear reducer and a fluid coupling with a back-stop device, achieving flexible transmission; the lower part uses a weight tensioning device, achieving automatic tensioning.

ParameterValue
TDG typeSuitable for looser, freely flowing powdery, granular and lumpy materials
THG typeRing-chain type, with high-strength round link chain as the traction member (GB/T 12718-91)
Sealing and environmentFully sealed casing, neither material nor dust escapes
Tensioning modeWeight automatic tensioning; a constant tensioning force is maintained after one installation and adjustment
Optional configurationLower level indicator and speed controller; signals can be connected to the central control room for monitoring

Note: the parameters above are compiled from product design standard data; the actual technical parameters and configuration are subject to the technical agreement between the two parties.