Application Scope and Maintenance Tips for Belt Conveyors
1. What is a belt conveyor
Before discussing the application scope and maintenance tips of belt conveyors, we must first understand what a belt conveyor is. A belt conveyor is also called a belt conveyor (also known as a rubber belt conveyor); it is one type of continuous conveying machine. The conveying feature of a belt conveyor is that it forms a continuous material flow between the loading points, and the material is transported from the loading point to the unloading point by the overall movement of that continuous material flow. The conveyor belt moves according to the friction drive principle, and it is suitable for conveying powdery, granular and small-block low-abrasive materials that are easy to scoop out, with a bulk density of less than 1.67 t/m³, as well as bagged materials.
2. The application scope of belt conveyors
A belt conveyor is a machine that drives by friction and transports material in a continuous way. Applying it, the material can form a conveying flow on a given conveying line, from the initial feeding point to the final discharge point. It can convey loose bulk material as well as piece goods. Besides pure material conveying, it can also be matched with the requirements of the process steps in the production flows of industrial enterprises, forming a rhythmic assembly-line conveying line. So belt conveyors on assembly lines are also widely used in all kinds of modern industrial enterprises. They are widely used in underground mine roadways, surface transport systems of mines, open-pit mines and ore dressing plants. A conveyor can convey horizontally, at an incline or vertically, and can also form a spatial conveying line; the conveying line is generally fixed, so it is very convenient to use.
3. Maintenance tips for belt conveyors
Based on the experience summarised over many years by Hunan Darui Heavy Machinery Co., Ltd., the maintenance tips for belt conveyors act on two aspects: one is the starting and stopping of the belt conveyor; the other is discovering and eliminating belt conveyor faults in time. The detailed maintenance tips are as follows:
(1) Starting and stopping; a conveyor should generally be started under no load. Where several belt conveyors are installed one after another, lockable starting devices should be used so that they can be started and stopped in a fixed order from the central control room. Besides this, to guard against sudden accidents, each conveyor should also be provided with a local start or stop button, so that any one of them can be stopped separately. To prevent the conveyor belt from being torn longitudinally for some reason, when the length of the conveyor exceeds 30 m, a stop button should be installed along the full length of the conveyor at a fixed interval (for example 25–30 m).
(2) Discovering and eliminating faults; to ensure reliable operation of the belt conveyor, the most important thing is to discover and eliminate faults that may occur in time. For this purpose the operators must observe the working condition of the conveyor at all times and deal with any abnormality promptly when it is found. Mechanical workers should patrol and inspect periodically for any condition or part that needs attention; this is very important. For example an idler roller does not seem very important, but a high-speed conveyor belt conveying abrasive material can soon wear its shell through and produce a blade-like edge, and that edge can seriously damage a costly conveyor belt. Trained workers or experienced staff can discover an accident that is about to happen in time and prevent it before it occurs. The conveyor belt accounts for a fairly large proportion of the whole cost of the conveyor. To reduce the cost of replacing and repairing conveyor belts, importance must be attached to training the operators and maintenance staff in the knowledge of conveyor belt operation and maintenance.
